ELMER KEITH’S FAVORITE LOADS WRITTEN BY JEFF “TANK” HOOVER

Looking back is supposedly bad because you just might see something gaining on you. I’ve always enjoyed a daredevil demeanor and the potential risks when peering back to our mentors. Doing so allows one to grab a glimpse into the future. Walking in the same boots of past pioneers gives us a chance to experience their findings firsthand, be it for better or worse. What can we expect by doing such things? It may help explain why the men did what they did, with what they had at hand.

By examining the components available, we learn some of the loads Elmer Keith came up with yesterday are still as useful and pertinent today. Some of these loads are timeless. We have a lot to be thankful for with men like him.

Keith had a knack of making cartridges more versatile by loading them to different power levels. As you’ll notice, most of these cartridges have three loads. A heavy load, a medium use everyday load, and a lighter “target” load. Such loads allowed a power continuum for an intended purpose. Pretty savvy for back in the day, and one just as useful today. There’s no need to load/shoot barnburner handloads all the time.

.45 Auto Rim

Keith designed Ideal mold 452423 to be cast hard, 1 to 10 tin/lead, weighing 235 grains, so it would hold the shallow rifling found in 1917 revolvers. He used 7.5 grains of Unique for a medium, everyday load and 14 grains of 2400 for a heavier hunting load. Also, 5 grains of Bullseye was his pet target load, shooting very accurately with light recoil.

Later, he figured out his 454424 .45 Colt slug, which weighed 250 grains also shot very well in the .45 Auto Rim when sized .451 while using the same powder charges for the Ideal 452423.

.45 Colt

Using Ideal #454424, Keith went with 5-6 grains of Bullseye for his light target loads, 10 grains of Unique for heavier, everyday loads and 18.5 grains of 2400 for full-power hunting loads. He stated the full house loads should only be loaded in smokeless powder designed guns, or guns with modern steel cylinders.

This bullet is a favorite of mine and I have taken numerous deer and a cow elk using it. Using large-framed Ruger single actions and Redhawks, I up the charge of 2400 to 20 grains of 2400, just as Keith did.

.38 Special

Keith’s Ideal 358429 was designed to be used in .38 Special cases, as the .357 Magnum had not been designed yet. No matter, Keith’s initial load of 13.5 grains of 2400 with his slug was perfect for Heavy Duty N-frame S&W guns, such as the adjustable sighted Outdoorsman and fixed sighted Heavy Duty.

Keith’s load was essentially a magnum load in .38 Special brass. Today’s 2400 is slightly faster, and maximum loads should not exceed 13.0 grains of 2400, with a small pistol primer. My guns average 1,260 FPS with this load with exceptional accuracy. With .38 Special cases more abundant than .357 Magnum, you won’t miss the Magnum with this load at all. I’ve basically shot thousands of this load over the years in magnum sized guns with happy results.

.44 Special

Keith designed the Lyman/Ideal 429421 for the .44 Special in the early 20s. He enjoyed 5 grains of Bullseye for a gallery load, 7.5 grains of Unique for a medium load and 17 grains of 2400 for his heavy load. You may recognize the Unique load as “the Skeeter Load” and you’re right. Skeeter obtained this load from Keith. The heavy .44 Special load was the impetus for the .44 Magnum.

.44 Magnum

After shooting heavy .44 Special loads for years, Keith petitioned Remington and S&W to make his hot loaded .44 Specials a factory offering. He wanted them to duplicate his 1,200 FPS loading. It’s all he wanted.

The folks at Remington were worried about his high-pressure loads being shot in older guns. Remington remedied this by using a case 1/10” longer than .44 Special brass, making it impossible to load in .44 Special guns.

Carl Hellstrum of S&W agreed to build a gun around any load Remington would bring out. Remington’s load reached 1,400 FPS, using a soft lead gas checked slug.

Keith developed perhaps his most famous load, 22 grains of 2400, with his 250 grain 429421 slug, ignited with a standard large pistol primer. Velocities run around 1,400 FPS, depending on barrel length. With today’s 2400, this load should be dropped to 21 grains of 2400 to reach the same velocities

.41 Magnum

Keith never designed Lyman’s 410459 mold made for the .41 Magnum. It’s a common assumption and mistake made by many. However, he did design a bullet for Hensley & Gibbs, weighing 230 grains.

The Hensley & Gibbs #258 mold has all the qualities Keith desired for his cast bullets. His light load consisted of 4 grains of Bullseye, 7.5 grains of Unique for a heavier load, and 19 to 20 grains of 2400 for a heavy load. This last load goes between 1400-1500 FPS, depending on barrel length.

Keith took 5 caribou with the pair of 4” S&W model 57s given to him by S&W and Remington soft-nosed factory ammo. He claimed the .41 Magnum shot flatter than his .44 Magnum load.

An Alliant Alliance

By using the old Hercules powders, now made by Alliance, we can still handload powerful, useful cartridges for hunting, light, plinking loads for target, or introducing someone to handgunning, or moderate, everyday field loads that can basically handle any chore.

The fact they were Elmer Keith’s pet loads makes us feel closer to him every time we pull the trigger and have one of his cast bullet designs strike its intended target as they have been doing for over 100 years now. And that my friends, is pretty darn cool.