The British STEN submachine gun was born from desperation. Early June 1940 had seen the British Expeditionary Force ignominiously kicked off the European Continent. A herculean rescue effort pulled 340,000 men from the Dunkirk beaches, but all their equipment had to be left behind for the victorious Germans. France was two weeks away from total capitulation and it didn’t take a genius to figure out that Adolf Hitler would quickly turn his focus to the island nation across the English Channel.
In a June 4 speech before Parliament, Winston Churchill declared “We will never surrender!” His nation needed to hear that, but the truth was they had little with which to back it up. The threat of a German invasion was very real at the time (it wasn’t practical but that wasn’t evident just then). The British needed arms for those rescued soldiers and they needed them yesterday.
Desperately Seeking a Submachine Gun
The British Army entered World War II without a domestic submachine gun. The short campaign on the Continent showed the need for such a weapon, especially after seeing the German MP38 in action. They had some American Thompsons, but not nearly enough. Thanks to the isolationist sentiments of the United States, Congress stipulated that any war material sold to belligerents had to be paid for in hard currency, meaning actual gold. Thompsons were expensive to produce. In 1940, one Thompson cost about $200 to make. That’s a little over $4,000 in today’s money. For a nation that needed lots of everything, spending their limited gold reserves on submachine guns was more than impractical.
A couple of German submachine gun copies were tried after acquiring some examples from Ethiopia. Fifty thousand units of the Lanchester submachine gun, a direct copy of the German MP28, were produced, but they were heavy, complicated, and expensive. Most ended up with the Royal Navy and many served into the 1970s as an anti-boarding weapon. But that was not the answer. A cheap gun that could be mass produced quickly was needed.
The solution was provided by Major Reginald V. Shepherd and Mr. Harold J. Turpin. The new design was made of stamped sheet steel components welded together. The only machined parts were the bolt and the barrel. The gun was called the “STEN.” The “S” and “T”came from the first letters of the last names of the designers and the “EN” came from Enfield, the famed firearms manufacturer where the weapon was developed. It worked well enough, could be produced at a prodigious rate, and was affordable. Following the trend of copying German models, the STEN was chambered in 9mm Luger.
The most recognizable feature of the STEN series is the side-mounted magazine well. It made the gun easy to fire from the prone, but it made it difficult to grasp properly with the off hand. Soldiers often grasped the mag well from the top, though they had to be careful not to put pressure on the mag. The mags were not especially reliable to start with since they were double stack single feed models, which causes feeding issues. They held 32 rounds and the feeding problems were mitigated by downloading them to 30. Exerting pressure on the mag while in operation could easily cause a failure to feed. Soldiers were taught to grip the gun under the heat shield, like a regular rifle, with the mag resting on top of their arms. Some did that but many continued to grip the mag well from the top.
Different Versions of the STEN
Eventually, the STEN series yielded five official versions, Mk I through Mk VI. The Mk IV was a proposed airborne version that was never adopted, so there was never an actual Mk IV produced. There was also the Mk I* (read as “Mark I star”) which was a simplified Mk I and doesn’t count as its own version. The Mk I* served as the basis for the Mk II, which was the most produced version by far and is considered the “classic” STEN gun.
The STEN underwent a series of evolutions that, somewhat ironically, seemed to go almost full circle in terms of the gun’s features. The Mk I had a sturdy skeletal stock, wood handguard and “pistol grip,” barrel-length heat shield, flash suppressor, and a folding vertical foregrip. The side mag well could be rotated down for storage and transport. The rotating mag well also served as a dust cover for the ejection port. A large barrel nut allowed the barrel to be easily removed for cleaning or storage.
The Mk I* lost the wood, foregrip, and flash suppressor, creating the bare bones look of the eventual Mk II. As noted earlier, the key thing to remember with the STEN’s development is that the British needed lots of them at the cheapest price in the shortest time possible. There was little thought given to ergonomics other than basic functionality and aesthetics were not considered at all. Having a Nazi knife at the national throat will do that.
The Mk I was adopted in March of 1941 and about 300,000 were made. 200,000 of those were Mk I*s. The development of the STEN was so fast that five months later, in August, the even simpler Mk II went into production. Keep in mind that Britain was still fighting Hitler alone until June 22 of that year, when the Nazi warlord stabbed his Russian allies in the back with Operation Barbarossa. Even then, the best estimates predicted a Soviet collapse by fall. The British kept producing weapons as fast as they could turn them out.
And turn them out they did. At the height of its production, a complete STEN Mk II required five and a half man hours to make. Factories could build 500 units in a single shift. They were cost effective too. Fifteen Mk II STENs could be produced for the cost of one American Thompson at the 1940 price. Over two million STEN Mk IIs were cranked out during the war. Even accounting for its two-year head start, STEN production dwarfed that of its American equivalent, the M3 “Grease Gun.”
1943 saw the introduction of the Mk III, which simplified the Mk II by axing the removable barrel, making the gun a monolithic sheet metal tube. Mk III parts, however, were not always interchangeable with other STEN models and the one-piece gun made maintenance difficult.
Even so, 876,000 Mk IIIs were made. To put that in perspective, the United States only manufactured 655,390 Grease Guns of all configurations, ever. The British Army was literally awash in STEN guns by the end of the war. Even the Germans used captured STENs. Their version of the Mk II was the MP 3008, and the Mk III was called the MP 750 (e).
The STEN Mk V came along in 1944, by which time the threat against Britain had eased considerably and the Germans were on the defensive. The Mk V reflected those changed conditions in that it was built more with quality and ergonomics in mind, though it was still a cheap submachine gun. The new gun had a proper wooden stock and pistol grip. Some had a wood vertical foregrip, hearkening back to the Mk I just a bit. The rear aperture sight was retained but instead of the crude triangle front sight, the Mk V sported a Lee Enfield Rifle front sight. The Mk V also had a lug for a Lee Enfield bayonet. 527,000 were made from February 1944 until the end of the war in 1945.
In my research I saw several examples of what appeared to be STENs with parts from other models, mostly the Mk II and especially the stocks. I can’t say why that is, other than the number of models and the need to slap them together quickly may have led to some overlap of production or maybe they were modified later with available parts.
Not Always Reliable
The STEN had a reputation for jamming, in large part because of the poorly designed magazines. Even more alarming was the propensity of the open bolt guns to fire if they dropped and sometimes keep firing until the mag was empty. There are accounts of British soldiers cocking a STEN and chucking it into a roomful of enemy soldiers, knowing it would run itself in a circle until it was empty.
It sounds like Hollywood stuff, but the stories are out there. The most credible account that I saw was from a Canadian officer in Korea in 1953 who tells the story of one of his men dropping his STEN and he and others trying to avoid it:
At first we did some shy polka steps to avoid getting hit, but as the rotation speed increased so did our dance. With about 10 rounds to go the muzzle of the weapon started flipping up, as if looking for a larger target. It was then that the first primitive steps of what would later become known as break-dancing came into being… (Quote: Legion magazine, April 1994)
You can decide for yourself, but I tend to believe it based on seeing similar things in many different places.
Suppressed STENs for Special Ops
A suppressed version of the Mk II was developed for special operations, most notably the Special Operations Executive (SOE). The SOE was the British version of the OSS. They operated in occupied Europe assisting resistance fighters in every nation. The STEN Mk II (S) was intended not only for SOE operatives but was dropped by the hundreds, maybe thousands, to those freedom fighters. The “S” stands for “Special Purpose,” not “suppressed” or “silenced.”
The suppressor system was fairly simple, with a 12.25-inch suppressor threaded onto a barrel shroud/expansion chamber. The suppressor had eighteen baffles separated by wire mesh rings. To allow the use of standard supersonic ammunition, six holes were cut in the barrel, directly in front of the chamber, to allow enough gas to escape that the bullet would stay subsonic. This, combined with the fortuitous decision to chamber the STEN in 9mm Luger, allowed SOE and resistance personnel to use captured German ammo.
The baffle system wasn’t especially durable and the suppressed STENs were meant to be fired in single shots or, at most, small bursts. Even one magazine on full automatic could ruin the baffles, defeating the purpose of the suppressor. Since the suppressed guns were intended for missions like sentry elimination or assassinations, as opposed to hard front-line combat, this wasn’t usually a problem. Some were produced in semi-auto only. The guns came with a canvas handguard, over horsehair or asbestos string, on the suppressor.
The reduced energy from the cartridge meant the action needed attention as well. The danger was that the gun could short stroke and jam or, even worse, cycle just enough to pick up a round without engaging the sear, resulting in a runaway gun. This problem was solved by slicing off some of the bolt, reducing its weight from 600 grams to about 493. A coil was also taken from the recoil spring, making it a bit longer. Interestingly, each spring seems to have been tailored by the armorer at the factory to its particular bolt and suppressor. These were not precision parts by any stretch. So, the length of each spring may vary a bit, making the suppressor, bolt, and recoil spring a set that is not necessarily interchangeable with other guns.
Another interesting thing about suppressed STENs is that, despite the mostly standardized Mk II (S), there were numerous guns modified for suppression by the SOE and operatives in the field. If you run across a suppressed STEN that doesn’t match the description above, that doesn’t mean it’s not authentic. Very late in the war, a suppressed version of the Mk V was implemented but it saw little action in World War II. This was the Mk VI. It used the same suppressor system as the Mk II, just with Mk VI everything else.
There are also modern suppressed STENs out there.
The sheer number made, and their adaptability, make it easy if you know what you’re doing. SilencerCo haa a Mk II that is threaded at 1/2×28 and runs with the Omega 9K and Omega 36M on. I’d imagine this setup is more durable and reliable than the World War II versions. So, if you’re looking to suppress your STEN, I say go for it.
Good Enough
The STEN gun, while not perfect by any means, was good where it had to be. Despite being officially replaced by the Sterling, it stayed in British Service, in one form or another, until 1971. The STEN’s cheap but ruggedly simple construction meant that it was easily produced and attractive outside Britain. It was copied by the Germans during the war and afterward by France, Norway, Denmark, Poland, Austria, Argentina, and Belgium. Many resistance units, most notably the Norwegians, produced their own STENs during the war. Hard post World War II service was seen in Korea, Vietnam, and the India-Pakistan Wars.
Despite being a desperate wartime expedient, the basic soundness of the STEN design served Great Britain, and the Allied cause, admirably. It deserves to ranked among the great war weapons of World War II and the Twentieth Century.
