Growing up with a father, uncles, and cousins who struggled to maintain our California farm during the Depression and then fought in an existential war was a constant immersion in their predominantly tragic view of life.
Most were chain smokers, ate and drank too much, drove too fast, avoided doctors, and were often impulsive—as if in their fifties and sixties, they were still prepping for another amphibious assault or day-time run over the Third Reich.
Though they viewed human nature with suspicion, they were nonetheless upbeat—their Homeric optimism empowered by an acceptance of a man’s limitations during his brief and often tragic life. Time was short; but heroism was eternal. “Of course you can” was their stock reply to any hint of uncertainty about a decision.
The World War II generation had little patience with subtlety, or even the suggestion of indecision—how could it when such things would have gotten them killed at Monte Cassino or stalking a Japanese convoy under the Pacific in a submarine?
One lesson of the war on my father’s generation was that dramatic action was always preferable to incrementalism, even if that meant that the postwar “best and brightest” would sometimes plunge into unwise policies at home or misadventures abroad.
Another lesson the World War II generation learned—a lesson now almost forgotten—was that perseverance and its twin courage were the most important of all collective virtues. What was worse than a bad war was losing it. And given their sometimes tragic view of human nature, the Old Breed believed that winning changed a lot of minds, as if the policy itself was not as important as the appreciation that it was working.
In reaction to the stubborn certainty of our fathers, we of the Baby Boomer generation prided ourselves on introspection, questioning authority, and nuance.
We certainly saw doubt and uncertainty as virtues rather than vices—but not necessarily because we saw these traits as correctives to the excesses of the GIs. Rather, as one follows the trajectory of my generation, whose members are now in their sixties and seventies, it is difficult not to conclude that we were contemplative and critical mostly because we could be—our mindset being the product of a far safer, more prosperous, and leisured society that did not face the existential challenges of those who bequeathed such bounty to us.
Had the veterans of Henry Kaiser’s shipyards been in charge of California’s high-speed rail project, they would have built on time and on budget, rather than endlessly litigating various issues as costs soared in pursuit of a mythical perfection.
The logical conclusion of our cohort’s emphasis on “finding oneself” and discovering an “inner self” is the now iconic ad of a young man in pajamas sipping hot chocolate while contemplating signing up for government health insurance.
Such, it seems, is the arrested millennial mindset. The man-child ad is just 70 years removed from the eighteen-year-olds who fought and died on Guadalcanal and above Schweinfurt, but that disconnect now seems like an abyss over centuries.
One cannot loiter one’s mornings away when there is a plane to fly or a tank to build. I am not sure that presidents Franklin Roosevelt, Harry Truman, and Dwight Eisenhower were always better men than were presidents Bill Clinton, Barack Obama, and Donald Trump, but they were certainly bigger in the challenges they faced and the spirit in which they met them.
This New Year’s Eve, let us give a toast to the millions who are no longer with us and the thousands who will soon depart this earth. They gave us a world far better than they inherited.
It’s an old, battle-tested design that still gets the job done. Meet the Hi-Power.
John Moses Browning graced the gun world with a wealth of amazing firearms, but his “final design” delivered – if not fully completed – something truly special. We’ve actually already done a nice video covering some of the variants. So here we will do something different and pay homage to a gun that lived a rough life and keeps on ticking.
The Hi-Power became one of the most-serving military pistols in history, fighting on both sides of World War II and even making its way to the recent wars in Afghanistan and Iraq. In fact, last we checked, the Canadian military was still working to replace their aging Inglis Hi-Powers from World War II.
Various Hi-Powers served in militaries and police forces around the world, still making appearances to this day from time to time. This old FEG now sports a replacement Hogue grip. (Photo: Paul Peterson/Guns.com)
If there’s one thing that really stands out about the Hi-Power, it has got to be the capacity. In the 1930s, Browning’s design delivered 13+1 rounds of 9mm. It did this by using a double-stack magazine in a platform that was also reliable and easy to maintain and mass produce.
WHAT’S THE STORY HERE?
This Hungarian-made FEG is a close clone to the Browning original design and other FN Browning Hi-Powers made around the time FEG began production in the 1970s. (Photo: Paul Peterson/Guns.com)
This Hungarian-made FEG Hi-Power is really more of a clone of the genuine FN-made Hi-Power, but it shows the same brilliance in the design. It also took a fairly wondering path to the American market. You can dig for hours to try and decode the history of a FEG Hi-Power that “somehow came into Israeli hands” and was eventually imported into the U.S.
Accurate information on these FEG pistols can be a bit fuzzy and occasionally questionable. The hack job on the grip to accommodate a pistol lanyard here suggests to me this gun found its way into service in Israel at some point. Lots of firearms took various routes into Israel, so I won’t claim to be an expert on the hidden secrets this one holds.
You can see where the grip panel was roughly cut to accommodate a loop attachment. The attachment itself was removed, but the ragged hole remains. (Photo: Paul Peterson/Guns.com)
There is a nice, affordable read on FEG Hi-Powers. But be warned, the true pedigree of many of the imports can be hard or nearly impossible to unlock. This pistol does feature the frame cross bolt and classic FN Browning Hi-Power operating system, although FEG did modify the internals of other designs later on. Frankly, I’ve learned to live with a little bit of mystery in this gun.
Note that this pistol boasts the cross bolt, center. Some other FEG “variants” changed the action of the gun and did away with the cross bolt. (Photo: Paul Peterson/Guns.com)
What I can say is this pistol has lived a life, and it has the slide wobble and wear to prove it. This one still boasts matching serial numbers on the barrel, frame, and slide. It has worked its way through at least three different owners in the U.S. before it landed in my safe. Though, I question if that is how it earned its weathered look.
Note the similar ring hammer and lanyard post on this former Israeli 1970s FN Browning T-series, presented here “in the white” without most of the bluing. After replacing the internal springs, it runs like a champ. (Photo: Chris Eger/Guns.com)
The gun has minimal markings. To the best of my knowledge, this particular pistol was produced in Hungry by FEG and then imported by (or otherwise acquired by) Israel at some point. FEG began creating their own clone variants of the Hi-Power in the 1970s, and Israel was often on the hunt for any firearms they could find for their military and police. It could be a trade-in that was modified or simply a FEG-produced gun that was repurposed for other uses.
The wooden grips on this pistol are thoroughly worn. (Photo: Paul Peterson/Guns.com)
This particular pistol shows plenty of signs of wear, and that also suggests a fairly rugged service life. The fairly crude cut in the left wooden grip panel where someone installed a lanyard loop attachment also hints at a life of service on a shoestring budget.
Unfortunately, there is no easy way of knowing. The original magazines are also lost to history. Luckily, I’ve had no issues with the high-quality Mec-Gar replacements I picked up, and they even offer a 15+1 capacity.
New Mec-Gar mags function well in my FEG, and they offer a 15+1 capacity. (Photo: Paul Peterson/Guns.com)
HOW DOES IT SHOOT?
If this was a different gun with the same looks, I might raise an eyebrow before buying it. Short of the added Hogue grips to replace the severely worn wooden panels, I have not changed anything about the gun. Well, I did also take the liberty of putting a small amount of paint on the front site. The very simple notch sights have built up some glare where the bluing is rubbed off.
The crude sights may be basic, but they offer decent accuracy. (Photo: Paul Peterson/Guns.com)
The front sight was worn and shiny from rubbing, but a little paint sufficed for the range. (Photo: Paul Peterson/Guns.com)
Even with the basic sights, she holds on target well at 7 and 10 yards and is more than capable of 2-inch groups with little practice. The trigger has about a tenth of an inch of very light take-up before the wall, and it still breaks nice and clean at around 4.8 pounds.
Hi-Powers are not known for beautiful triggers, and that is pretty light trigger. Some users remove the magazine disconnect/safety to improve the trigger pull. This gun boasts that modification as well.
The trigger is quite light on this gun, but the reset is somewhat weak. Note the pinhole in the trigger where a previous owner removed the pin to pull out the magazine disconnect/safety. This model also hosts the external extractor, which replaced the earlier internal extractor. (Photo: Paul Peterson/Guns.com)
The gun won’t win any beauty pageants, but it can certainly get the job done. I pull the gun out of the safe a few times a year and get a few boxes through it for fun. In that time, I have had two malfunctions. Both were a failure to fully reset the trigger.
That could mean she needs a replacement spring here soon, but removing the magazine disconnect/safety is sometimes blamed for that issue as well. I suspect it could also be my personal experience with the trigger reset after bouncing between various guns at the range.
The gun is in relatively rough shape, which is not common for FEG imports. (Photo: Paul Peterson/Guns.com)
The gun does not forcefully push the trigger forward on its own to reset after each shot. It’s a relatively common complaint I’ve read from owners of similar examples. After revisiting the range, I was not able to duplicate the reset issue, and the gun hauled through a few boxes like an aging but resilient tank. The gun weighs in at just over 2 pounds unloaded, which helps eat some of the felt recoil as well.
FINAL THOUGHTS
Browning’s end design was simple to maintain and disassemble, having removed or improved some of the elements from previous pistol designs. (Photo: Paul Peterson/Guns.com)
At nearly a century old, the Hi-Power design still impresses. Mine was not a gun that was terribly well cared for during its life – and came with a price point to match that reality. Still, the fact that it keeps moving along makes me love it just a little bit more.
The design also worked around some of the additional complexities of previous guns, such as the barrel link and bushing in the 1911. Disassembly is quick, easy, and demonstrates the “complex” simplicity behind the gun’s design.
Note the lack of a barrel bushing you might find on a 1911. This makes disassembly quite simple and familiar to those accustomed to more modern pistols. (Photo: Paul Peterson/Guns.com)
Sadly, the manufacture of new Hi-Power pistols stopped in 2017, ending a production history that spanned more than 80 years. The good news? There are plenty of used Hi-Powers still floating around in much better shape. Fans of the gun are fans for a reason, so check them out.