The Browning Hi Power

 
What's Wrong With the Hi Power?
Now I do not know about you. But If I were to have any other pistol as my House Defender than my Sig Sauer P-220. Then I would grab hold of my Browning Hi Power in 9mm. Knowing that it is almost as good as the Bruiser.
Image result for browning Hi power
For some additional evidence that will back me up on this subject.
If you were to look below at the additional information sect. One would find that a lot of very squared away outfits over the years. Have or had used this gun as their sidearm of choice. This alone makes it a very compelling argument for me.
Image result for browning Hi power combat
Image result for browning Hi power
My only complaint about it is that the trigger usually needs a little work. But any decent gunsmith can fix that one.
Also I have been told that the Hammer likes to taste human flesh at times. (I have never had that problem myself & I have some beefy hands. Or as I have been told)
Image result for browning Hi power combat hammer bite
Image result for browning Hi power combat hammer bite
As to its functioning & performance.
Related image
As it stands right now. I have now owned several of them over the years. That & I have shot someones elses.  For about 15 years as near as I can remember. So while I am no great fan of the 9mm for self defense.
Image result for the 9mm parabellum
Image result for the 9mm parabellum dimensions
I can however usually keep most of the rounds in the black at 25 feet. Which is a lot more than some of my other pistols that I have had experience with.
Here is another good recommendation
Even Prince Harry – (Horse Guards) carried one in Afghanistan. And you just know that HE had his choice of sidearm to carry. So if it’s good enough for him. I think it just might be just good enough for me.

Here are a few videos on this fine Gun

Here is another good article that supports my theory about this fine pistol.

Why You Should Own The Impressive Browning Hi Power

browning hi power

image credit commons.wikimedia.org

When it comes to a combat or self-defense handgun, we shooters usually fall into a few different camps. These camps are divided by fierce and passionate people who believe their handgun is the best choice. A lot of times these people aren’t wrong that their pistol is the best—for them anyway. Some people love Glocks, or some love 1911s or Sigs. Some guys would never carry an automatic and stick to the dependable wheel gun. I’m not picking at these guys; their choice is their choice.
A handgun that doesn’t get enough attention in my opinion is the Browning Hi Power. I can see why— I’m guilty of this myself. Of course I always knew about the Hi Power; I knew it was a Browning design, so I instantly equated it to quality. That’s about as much as I knew about it. Kind of like a cousin from a distant aunt: I know he’s there but that’s about it. Everyone recognizes the name, but few love and appreciate it.
Oddly the Hi Power is probably better known in countries around the world than America. This could be the fact the Hi Power wasn’t widely adopted by police forces and never saw any service with the US military. In fact, the FBI Hostage Rescue Team is the only well-known policing force I could find that issued them.  Around the world though, it saw expansive use, in fact it was adopted in dozens of countries including the United Kingdom, Canada, and Israeli’s elite Yamam counter terrorism unit.
As you can see, it wasn’t just third-world nations that adopted this wonderful design, but rather modern militaries and some of our closest allies. The Browning Hi Power is a single-action handgun chambered in the venerable 9×19 Luger. The pistol burst onto the scene with its 13-round magazine, and this was in 1935: the standard capacity was around 7-to-8 rounds back then.
Nowadays I’ll admit 13 rounds of 9mm is kind of weak compared to the Glock 17 and the other wonder nines that seem to squeeze more and more rounds in their magazines. There is a quality aftermarket magazine made by Mec Gar that holds 15 rounds that does not extend past the pistol grip, along with 20 and 30 round magazines if that’s your flavor of Kool-Aid. There are South African 17-round magazines, but I have no experience with these and I’ve heard the reliability is hit or miss.
In my opinion a 15-round magazine is enough to help the Hi Power strive against the modern pistols. Now, as I said before, the pistol was chambered in the good old 9mm, but as the years went on, someone decided it needed to be chambered in 40 S&W, and it worked.  The 40 has quite the cult following, and again, it’s all personal preference, whether you want a bigger bullet or more bullets is all up to you. Oh you want it in 45? They have that too—it’s called a 1911.
Keep Your Handgun Locked and Loaded, Ready For Instant Use – Without Fear Of An Accident!
This whole topic came up to me because I fired my first Hi Power this Memorial Day. The Hi Power was a Browning and belonged to a friend who just purchased it that Friday. My first impression picking the weapon up was its heft. I’m not spoiled by the polymer pistols just yet, but the 9mm full-sized I’m used to is the military-issue M9. The Hi Power weighs noticeably more, almost as much as a 1911.
Like I said, I’m not spoiled on lightweight weapons, but a heavy pistol can be uncomfortable for some to conceal on a day to day basis, so this can be a negative aspect in the world of air weight J frames. My second impression was the overall comfort of the weapon in my hand: it just felt right. My gorilla hands rarely fit any stock grips perfectly, but something about the Hi Power suited me so well. The same was true for my friend, who is much smaller than me. He also loves how the trigger seems to be for his smaller hands. John Browning was a master of ergonomics in that this pistol feels like it was built for everyone.
The Browning slide is also much thinner than the usual Glocks and Sigs. This makes the weapon easier to conceal and actually more comfortable when pulled close to the body in a bellyband or IWB holster. The weapon, besides its weight, is pretty easy to conceal. If you carry a Sig or 191,1 the Hi Power will feel right at home.
Actually firing the Hi Power was a joy. The trigger was firm, but the trigger pull was crisp and consistent. It never felt spongy or stagey or anything like that. Honestly, I would describe it as a refined service pistol trigger. The sights were a typical low-profile three dot. The sights are simple and easy to use—nothing over the top—but perfect for a defensive pistol. My friend mentioned and I confirmed through Browning that there is a model with adjustable target sights.
The heft of the pistol made controlling the standard Winchester white box a breeze, even in rapid fire. The single action trigger, combined with controllability of the pistol make it easy to fire double taps or hammer pairs depending on your term preference. Apparently the old Hi Powers never functioned very well with hollow points, we strapped in some JHPs and the Hi Power ate them up. Apparently the older Hi Power and the unlicensed copies weren’t throated for wide mouth hollow points. These days it’s standard for the weapon to eat anything you feed it.
Accuracy with the weapon was superb. I should have brought something to measure the groups, but firing off hand, I impressed myself. My groups were all excellent, which I credit the pistol for. We didn’t just fire at a fixed line. We practiced drawing and firing, firing in the non-dominant hand, reloads, Mozambique drills, el presidente drills, firing from multiple positions like standing, kneeling, around “barriers” and forward and rear prone. The pistol performed well, and the ergonomics really shined during this drills.
The safety is very similar to the 1911. The model I fired featured a large, ambidextrous thumb safety above the grip. The safety was very easy to engage in both safe and fire mode. The safety was very easy to reach for with both small and large hands.
Shopping around online, I was surprised to see the amount of quality holsters out there. Browning has their own holsters, and De Santis makes beautiful holster as always. I was disappointed to find out that Blackhawk does not produce a holster in their popular SERPA line for the Hi Power. I personally love the SERPA and would love to see one that fit the Hi Power.
Magazines are pretty widely available as well and typically priced. I suggest going with either Browning mags or Mec gar. If Wilson Combat put out mags for the Hi Power, I’d be all over them. There are some very cheap surplus mags out there that may be hit or miss, as a lot of surplus stuff usually is.
I’ve officially fallen in love with the Hi Power. The Hi Power is such a refined pistol, and it’s knocked the 30-06 Winchester Model 70 off the top of my wish list. The Hi Power may not have its fan club shouting how wonderful it is or someone arguing the Hi Power is the only way to go, but I think it deserves a second look. I would suggest to anyone that sees a Hi Power just hold it and tell me you don’t like your first impression.
The price varies by whatever country is putting them out, as well as the quality. Portuguese versions can be picked up for around six hundred in very good condition. Newer Brownings are about double that. The weapon is expensive, and that’s bound to turn some people off when a Glock can be had for six hundred. I can fully understand that reasoning, but something about the pistol is drawing me to it.
I can’t wait to have my hands on a piece of Browning’s history. I love the pistol, and I believe it will find a great place in my gun safe and stay there for a very, very long time.

Here is some more Technical Information about the Browning Hi Power Pistol.

Browning Hi-Power

From Wikipedia, the free encyclopedia
Browning Hi-Power
High power Inglis (6971784217).jpg

Browning Hi-Power
Type Semi-automatic pistol
Place of origin Belgium
United States
Service history
In service 1935–present[1]
Used by See Users
Wars World War II[1]
Korean War
Vietnam War
Rhodesian Bush War
Falklands War
The Troubles
War on Terror
Production history
Designer John Browning
Dieudonné Saive
Designed 1914–35[1]
Manufacturer Fabrique Nationale (FN)
Produced 1935–present[1]
No. built 1,000,000+[2]
Variants See Variants
Specifications
Weight 1 kg (2.2 lb)[1]
Length 197 mm (7.8 in)[1]
Barrel length 119 mm (4.7 in)[1]

Cartridge
Action Short recoil operated
Rate of fire Semi-automatic
Muzzle velocity 335 m/s (1,100 ft/s) (9mm)[1]
Effective firing range 50 m (54.7 yd)
Feed system Detachable box magazine; capacities:

  • 13 or 15 rounds (9mm)[1]
  • 10 rounds (.40 S&W)

The Browning Hi Power is a single-actionsemi-automatic handgunavailable in 9mm and .40 S&W calibers. It is based on a design by American firearms inventor John Browning, and completed by Dieudonné Saive at Fabrique Nationale (FN) of Herstal, Belgium. Browning died in 1926, several years before the design was finalized. The Hi-Power is one of the most widely used military pistols in history,[3] having been used by the armed forces of over 50 countries.[1]
The Hi Power name alludes to the 13-round magazine capacity, almost twice that of contemporary designs such as the Luger or Colt M1911. The pistol is often referred to as an HP (for “Hi-Power” or “High-Power”),[4] GP (for the French term, “Grande Puissance”) or BHP (Browning High-Power). The terms P-35 and HP-35 are also used, based on the introduction of the pistol in 1935. It is most often called the “Hi Power”, even in Belgium.

Development[edit]

A FN Browning High Power, belonging to the Indonesian Marine Corps

The Browning Hi-Power was designed in response to a French military requirement for a new service pistol, the Grand Rendement(French for “High Yield”), or alternatively Grande Puissance (literally “high power”). The French military required that:

  • the arm be compact
  • the magazine have a capacity of at least 10 rounds
  • the gun have a magazine disconnect device, an external hammer, and a positive[clarification needed] safety
  • the gun be robust and simple to disassemble and reassemble
  • the gun be capable of killing a man at 50 meters

This last criterion was seen to demand a caliber of 9 mm or larger, a bullet mass of around 8 grams (123.5 grains), and a muzzle velocity of 350 m/s (1148 ft/s). It was to accomplish all of this at a weight not exceeding 1 kg (2.2 lb).
FN commissioned John Browning to design a new military sidearm conforming to this specification. Browning had previously sold the rights to his successful M1911 U.S. Army automatic pistol to Colt’s Patent Firearms, and was therefore forced to design an entirely new pistol while working around the M1911 patents. Browning built two different prototypes for the project in Utah and filed the patent for this pistol in the United States on 28 June 1923, granted on 22 February 1927.[5][6] One was a simple blowback design, while the other was operated with a locked-breech recoil system. Both prototypes utilised the new staggered magazine design (by designer Dieudonné Saive) to increase capacity without unduly increasing the pistol’s grip size or magazine length.
The locked breech design was selected for further development and testing. This model was striker-fired, and featured a double-column magazine that held 16 rounds. The design was refined through several trials held by the Versailles Trial Commission.
In 1928, when the patents for the Colt Model 1911 had expired, Dieudonné Saive integrated many of the Colt’s previously patented features into the Grand Rendement design, in the Saive-Browning Model of 1928. This version featured the removable barrel bushing and take down sequence of the Colt 1911.
By 1931, the Browning Hi-Power design incorporated a shortened 13-round magazine, a curved rear grip strap, and a barrel bushing that was integral to the slide assembly. By 1934, the Hi-Power design was complete and ready to be produced. It was first adopted by Belgium for military service in 1935 as the Browning P-35. Ultimately, France decided not to adopt the pistol, instead selecting the conceptually similar but lower-capacity Modèle 1935 pistol.

Design[edit]

The Browning Hi-Power has undergone continuous refinement by FN since its introduction. The pistols were originally made in two models: an “Ordinary Model” with fixed sights and an “Adjustable Rear Sight Model” with a tangent-type rear sight and a slotted grip for attaching a wooden shoulder stock. The adjustable sights are still available on commercial versions of the Hi-Power, although the shoulder stock mounts were discontinued during World War II. In 1962, the design was modified to replace the internal extractor with an external extractor, improving reliability.
Standard Hi-Powers are based on a single-action design. Unlike modern double-action semi-automatic pistols, the Hi-Power’s trigger is not connected to the hammer. If a double-action pistol is carried with the hammer down with a round in the chamber and a loaded magazine installed, the shooter may fire the pistol either by simply pulling the trigger or by pulling the hammer back to the cocked position and then pulling the trigger. In contrast, a single-action pistol can only be fired with the hammer in the cocked position; this is generally done when a loaded magazine is inserted and the slide cycled by hand. In common with the M1911, the Hi-Power is therefore typically carried with the hammer cocked, a round in the chamber and the safety catch on (a carry mode often called cocked and locked in the USA or “made ready” in the UK, or sometimes called condition one).
The Hi-Power, like many other Browning designs, operates on the short-recoil principle, where the barrel and slide initially recoil together until the barrel is unlocked from the slide by a cam arrangement. Unlike Browning’s earlier Colt M1911 pistol, the barrel is not moved vertically by a toggling link, but instead by a hardened bar which crosses the frame under the barrel and contacts a slot under the chamber, at the rearmost part of the barrel. The barrel and slide recoil together for a short distance but, as the slot engages the bar, the chamber and the rear of the barrel are drawn downward and stopped. The downward movement of the barrel disengages it from the slide, which continues rearward, extracting the spent case from the chamber and ejecting it while also re-cocking the hammer. After the slide reaches the limit of its travel, the recoil spring brings it forward again, stripping a new round from the magazine and pushing it into the chamber. This also pushes the chamber and barrel forward. The cam slot and bar move the chamber upward and the locking lugs on the barrel re-engage those in the slide.

Design flaws[edit]

The pistol has a small number of design issues. The standard trigger pull is heavy, especially for a single-action pistol. This disadvantage is a consequence of the Hi-Power’s magazine disconnect safety, which was initially added to the model to meet the requirements of the French military in 1935. The standard Hi-Power magazine safety is connected to the trigger and is released by a plunger pressing on the surface of the magazine. This action of the plunger on the magazine adds tension to the trigger pull, and the required force to operate this feature adds resistance as well.[7] This problem is often resolved by removing the magazine safety entirely, thus voiding the pistol’s warranty, or by polishing the interface surfaces between the safety plunger and the magazine.[8] After-market trigger springs with reduced tension are also available to improve the trigger pull.
In addition, the pistol has a tendency to “bite” the web of the shooter’s hand, between the thumb and forefinger. This bite is caused by pressure from the hammer spur, or alternatively, by pinching between the hammer shank and grip tang.[citation needed] Many HP owners fix this problem by altering or replacing the hammer, or by learning to hold the pistol to avoid injury.[weasel words] While a common complaint with the commercial models with spur hammers similar to that of the Colt “Government Model” automatic, it is seldom a problem with the military models, which have a smaller, rounded “burr” hammer, more like that of the Colt “Commander” compact version of the 1911.[citation needed]

Military service[edit]

Browning Hi-Power pistols were used during World War II by both Allied and Axis forces. After occupying Belgium in 1940, German forces took over the FN plant. German troops subsequently used the Hi-Power, having assigned it the designation Pistole 640(b) (“b” for belgisch, “Belgian”).[3] Examples produced by FN in Belgium under German occupation bear German inspection and acceptance marks, or Waffenamts, such as WaA613. In German service, it was used mainly by Waffen-SS and Fallschirmjäger personnel.
High-Power pistols were also produced in Canada for Allied use, by John Inglis and Company in Toronto. The plans were sent from the FN factory to Britain when it became clear the Belgian plant would fall into German hands, enabling the Inglis factory to be tooled up for Hi-Power production for Allied use. Inglis produced two versions of the Hi-Power, one with an adjustable rear sight and detachable shoulder stock (primarily for a Nationalist Chinese contract) and one with a fixed rear sight. Production began in late 1944 and they were on issue by the March 1945 Operation Varsity airborne crossing of the Rhine into Germany. The pistol was popular with the British airborne forces as well as covert operations and commando groups such as the Special Operations Executive (SOE), the U.S. Office of Strategic Services (OSS) and the British Special Air Service (SAS) Regiment. Inglis High-Powers made for Commonwealth forces have the British designation ‘Mk 1’, or ‘Mk 1*’ and the manufacturer’s details on the left of the slide. They were known in British and Commonwealth service as the ‘Pistol No 2 Mk 1’, or ‘Pistol No 2 Mk 1*’ where applicable. Serial numbers were 6 characters, the second being the letter ‘T’, e.g. 1T2345. Serial numbers on pistols for the Chinese contract instead used the letters ‘CH’, but otherwise followed the same format. When the Chinese contract was cancelled, all undelivered Chinese-style pistols were accepted by the Canadian military with designations of ‘Pistol No 1 Mk 1’ and ‘Pistol No 1 Mk 1*’.[9]
In the postwar period, Hi-Power production continued at the FN factory and, as part of FN’s product range which included the FN FAL rifle and FN MAG general-purpose machine gun. It has been adopted as the standard service pistol by over 50 armies in 93 countries. At one time most NATO nations used it, and it was standard issue to forces throughout the British Commonwealth. It was manufactured under licence, or in some cases cloned, on several continents. Former Iraqi ruler Saddam Hussein often carried a Browning Hi-Power. Former Libyan ruler Muammar Gaddafi carried a gold-plated Hi-Power with his own face on the design of the grips which was waved around in the air by Libyan rebels after his death.[10]A Hi-Power was used by Mehmet Ali Agca during the assassination attempt of Pope John Paul II in 1981.
While the Hi-Power remains an excellent design, since the early 1990s it has been eclipsed somewhat by more modern designs which are often double-action and are manufactured using more modern methods. It remains in service throughout the world. As of 2017, the MK1 version remained the standard service pistol of the Canadian Armed Forces, with the SIG Sauer P226 being issued to specialised units along with the SIG Sauer P225. The weapon is the standard sidearm of the Belgian ArmyIndian ArmyIndonesian Armed ForcesAustralian Defence ForceArgentine Army, Luxembourg Army, Israel Police, and Venezuelan Army, among others. The Irish Army replaced its Browning Pistols (known popularly as BAPs, or Browning Automatic Pistols) with the Heckler & Koch USP in 2007. From 2013 the British Army is replacing the Browning with the polymer-framed Glock 17 Gen 4 pistol, due to concerns about weight and the external safety of the pistol.[11]
The Hi-Power is still being produced by seven companies: FN Herstal, NorincoFegyver- és Gépgyár, the Ishapore Rifle FactoryPindad and KSN Industries.[12]

Specifications of the Mk I[edit]

A locked-breech, semi-automaticsingle-action, recoil-operated pistol. The Browning Hi-Power Mk I uses a 13-round staggered magazine.

  • Caliber: 9 mm
  • Length: 197 mm
  • Barrel length: 118 mm
    • length of rifled part: 100 mm
    • number of grooves: 6
    • direction of twist: right
  • Height (without sight, loaded): 127.5 mm
  • Width (with stocks): 36 mm
    • (without stocks): 25.5 mm
  • Weight (with empty magazine): 0.9 kg
    • (with loaded magazine): 1.060 kg
  • Capacity of magazine: 13 cartridges
  • Modes of fire: Single action
  • Muzzle velocity: 350 m/s
    • V12.50: 340 m/s
  • Muzzle energy: 500 J
  • Safeties: Half-cock notch, manual thumb safety, firing pin block, and magazine disconnect
  • Trigger pull: 7.5 lb
  • Effective Range: 50 m
  • Dispersion (firing 10 shots with rest)
    • at 15 metres: 95 mm (height 50 mm, width 45 mm)
    • at 30 metres: 200 mm (height 105 mm, width 95 mm)
    • at 50 metres: 320 mm (height 170 mm, width 150 mm)

Variants[edit]

Genuine Browning Hi-Power P-35s are still manufactured by FN Herstal of Belgium and Portugal and under licence by Fabricaciones Militares (FM) of Argentina. The Hi-Power remains one of the most influential pistols in the history of small arms. It has inspired a number of clone manufacturers (including Charles Daly of the Philippines & the US, FEG of Hungary, Arcus of Bulgaria, IMI of Israel, and others). Many modern pistols borrow features from it, such as the staggered column high-capacity magazine, and the Browning linkless cam locking system (which on modern pistols is often simplified so that the barrel locks into the ejection port, meaning the barrel and slide do not have to be machined for locking lugs). Until recently, FEG made an almost exact clone in 9mm and .40 S&W, but the company now manufactures a version with modifications to the barrel, linkage, and slide stop that are incompatible with genuine Hi-Powers. Arcus has also superseded its Arcus 94 Hi-Power clone with the Arcus 98DA, a model that draws heavily from the Hi-Power but is capable of double-action operation.

  • The original P35, as noted earlier, featured an internal extractor. During World War II, it was manufactured by Inglis of Canada for Allied use, and by FN in occupied Belgium for German use. The P35s made under Nazi occupation were designated as the Pistole 640b. Most Canadian P35s were manufactured with a parkerized finish, while most P35s manufactured in occupied Belgium had a blued finish. In 1962 the internal extractor was replaced with a more durable and reliable external extractor alongside other modifications, including a 2-piece barrel and modifications to the locking system for improved durability. Later barrels and frames are not interchangeable with earlier ones.
  • The L9A1, was the British designation for the military version of the post-1962 Hi-Power, and is marked ‘Pistol Automatic L9A1’ on the left side of the slide. It started to replace Inglis variants in British service from the late 1960s, and the two types remained in service together until the Inglis variants were finally retired in the late 1980s. It is still in service with the UK military forces, although now fitted with the more ergonomic Mk2 ambidextrous safety and grips. The L9A1 was also widely used by other Commonwealth armed forces. The Hi-Power was the pistol issued to the British Special Air Service throughout the Cold War era. Its usage was phased out in 2013 and replaced with the Glock 17.[13]
  • The Mark I is among the best-known models of the P35 developed over the last 50 years. P35s were first imported into the US in 1954 – the US civilian market P35s had the ‘Browning Arms Company’ stamp on the left side of the slide (to meet the import requirement for US sales under ATF Section 478.112). These P35s lack the provision of the lanyard ring – the left side pistol grip for a Mark I is fully covered unlike those produced for military and law enforcement use. A wide variety of options and features are available on the P35 models. Recently, Hi-Power pistols have become available in the .40 S&W and .357 SIG loadings. The use of these calibres in guns designed and built for 9×19mm Parabellum has created cases of broken or warped frames. Only Hi-Powers specifically built for these rounds should be used to fire them. The pistols manufactured for these two rounds are easily identified by examining the left side of the slide – a groove is machined into the side of the heavier slide to allow clearance for the slide release. Genuine FN-produced P35s (either FN (Europe/international) or Browning (USA) for the civilian market will have a 245-prefix serial number. Some Hi-Power variants (Type 65, Type 73) incorporate production changes e.g. spur hammers (commonly seen for 1971–present civilian market P35s) and/or 2-piece barrels (1965–present). The ‘Type 73’ variant (with an elongated barrel bushing) of the Mark I was produced into the late 1980s (to 1987) by FM Argentina when Mark II production commenced in the early-mid-1980s (Belgium).
  • The Mark I Lightweight is a very rare variant of the Mark I made with a lightweight alloy frame. According to Massad Ayoob, these were introduced commercially in the 1950s but never caught on. The Lightweights are marked only with Fabrique Nationale’s rollmarks, not Browning’s.
  • Mark II is an upgraded model of the original Hi-Power introduced in the early ’80s. Some of the upgrades were ambidextrous thumb safeties, nylon grips, 3-dot sights, and a throated barrel.
  • Mark III was another advancement over the Mark II released in 1988, which featured a firing pin safety and a black epoxy finish. The main distinguishing (visual) feature of the Mark III is the absence of the water drain hole below the muzzle on the forward face of the slide.
  • Standard is the name given to the Mark III variant with walnut grips, gloss finish, and choice of sights. A Standard is a Mark III model, but a Mark III is not necessarily a Standard.
  • The Silver Chrome featured a silver-chrome frame and slide, and Pachmayr rubber grips. The magazines for the silver chrome BHP had a dull finish and a black rubber Pachmayr basepad.
  • The Capitan is a Mark III variant that features adjustable tangent rear sights and a “ring hammer” like the early model HP35, checkered walnut grips, and a blued finish. It was reintroduced in 1993 and is still in production (c.2004).[14]

Browning Hi-Power Practical .40 S&W.

  • The Practical is a Mark III variant that features a matte-blued slide and contrasting silver-chromed frame. In addition, this model has wraparound Pachmayr rubber grips and a “ring hammer”. The Practical has fixed or adjustable sights, and is available in either 9 mm or .40 S&W. Magazines for all Practical models sport Pachmayr base pads; magazines feature a cartridge capacity of 13 rounds in 9 mm and a cartridge capacity of 10 rounds in .40 S&W.[15]

Browning Hi Power SFS with Crimson Trace laser sight

  • The HP-SFS (Safe-Fast-Shooting) is a current variation on the Hi-Power Mark III with a modified firing mechanism. After the weapon is loaded, the hammer is pushed forward, which automatically activates the safety catch. When the shooter is prepared to fire, the safety is pressed down with the thumb, releasing the hammer to spring backwards into the usual, single-action position. A similar system is available for modifying Colt M1911A1s. Magazines are interchangeable with the Mark III and others.
  • The BDA and BDAO models were first produced in the 1980s by FN. The BDA model is double-action, and the BDAO model is “double-action only,” both versions differing from the usual single-action operation of the P35. These designs have also been marketed as the FN HP-DA and Browning BDA. The DA and DAO models retain many features of the P35, and both are available in full-sized and compact versions. The performance of these models is consistent with FN’s high standards. These models resemble the P35, but the most distinguishing feature is the extended SIG-Sauer style trigger guard. Many parts are interchangeable with the P35, but the magazines (although similar) are not. The compact versions also utilise shorter magazines.[15]
  • The Browning BDM Model is sometimes erroneously attributed as a special model of the Hi-Power family of pistols. This is a unique pistol design only bearing an external similarity to the Hi-Power. The BDM was produced during the 1990s in North America by Browning Arms Company, and not by FN. The Browning BDM (Browning Double Mode) pistol incorporates many features of the BDA model. It can be switched from double-action/single-action mode to “revolver” mode (Double-Action Only) by the flip of a slide-mounted switch (this requires the use of a flathead screwdriver or a coin, as the switch doesn’t have a tang).
  • Both the DA/DAO models and the BDM model borrow features from the SIG Sauer SIG P220 pistols marketed under the name Browning Double Action (BDA) in the 1970s. The Beretta Cheetah has also been marketed by Browning under the name BDA 380.[citation needed]
  • The RosarioFM90 and FM95 models are manufactured by FM. The Rosario is an almost exact copy of the Mark II intended for Argentine and Latin American sales. The FM90 was an export model based on the Mark II, but with a “Colt style” slide without the characteristic bevelled front end, first made in 1990.[16] Rubberized pistol grips (similar to the Pachmayr grips used for P35s) with finger grooves were used in place of the traditional slabside wood grips. The FM95 was the current export model (until 2002) based on the Mark III, also with the “Colt style” slide. The last models, until 2010, are the M02 AR (modernised version of the M95, with a new single-action system by Fabrique nationale) and the M03 AR (not dated 2003, as it would seem, actually a .40S&W version of M02 AR) with their Detective versions.[15]
  • Pistol Auto 9mm 1A is manufactured in India by the Ordnance Factories Board at Rifle Factory Ishapore. It is a licensed copy of the Canadian Inglis 9mm pistol with a matte black finish and black plastic grips.

Pistol Auto 9mm 1A manufactured in RFI, India.

  • The Detective is a short-slide HP produced by FM. The Detective slide group was also available without the frame, and is interchangeable with other FM and FN Hi-Power P35s. The pistol and slide group have not been available for North American sales since the late 2000s, but can be found in resale outlets.
  • Fabricaciones Militares of Argentina has also developed a double-action pistol, not using the HP DA system.
  • The Arcus 94 is a single-action semi-automatic pistol manufactured by Arcus of Bulgaria as an unlicensed clone. There is a compact version, the Arcus 94C. It has been succeeded in production by the double-action Arcus 98DA.
  • Although the Browning name will appear on pistols imported to the United States, the model name “Hi-Power” will not be seen on any genuine FN/Browning manufactured pistol, regardless of country of origin or location of sale—clones will place the “Hi-Power” mark.

Users[edit]

A worn Browning Hi-Power, made in Argentina in the mid-’70s.

Canadian soldiers inspect a Hi-Power pistol during a training exercise in April 2009.

An Uruguayan Marine, armed with a Hi-Power during a training exercise in April 2009.

A 1971 Browning Hi-Power 10.

 
 
 

Why You Should Own The Impressive Browning Hi Power

browning hi power

image credit commons.wikimedia.org

When it comes to a combat or self-defense handgun, we shooters usually fall into a few different camps. These camps are divided by fierce and passionate people who believe their handgun is the best choice. A lot of times these people aren’t wrong that their pistol is the best—for them anyway. Some people love Glocks, or some love 1911s or Sigs. Some guys would never carry an automatic and stick to the dependable wheel gun. I’m not picking at these guys; their choice is their choice.
A handgun that doesn’t get enough attention in my opinion is the Browning Hi Power. I can see why— I’m guilty of this myself. Of course I always knew about the Hi Power; I knew it was a Browning design, so I instantly equated it to quality. That’s about as much as I knew about it. Kind of like a cousin from a distant aunt: I know he’s there but that’s about it. Everyone recognizes the name, but few love and appreciate it.
Oddly the Hi Power is probably better known in countries around the world than America. This could be the fact the Hi Power wasn’t widely adopted by police forces and never saw any service with the US military. In fact, the FBI Hostage Rescue Team is the only well-known policing force I could find that issued them.  Around the world though, it saw expansive use, in fact it was adopted in dozens of countries including the United Kingdom, Canada, and Israeli’s elite Yamam counter terrorism unit.
As you can see, it wasn’t just third-world nations that adopted this wonderful design, but rather modern militaries and some of our closest allies. The Browning Hi Power is a single-action handgun chambered in the venerable 9×19 Luger. The pistol burst onto the scene with its 13-round magazine, and this was in 1935: the standard capacity was around 7-to-8 rounds back then.
Nowadays I’ll admit 13 rounds of 9mm is kind of weak compared to the Glock 17 and the other wonder nines that seem to squeeze more and more rounds in their magazines. There is a quality aftermarket magazine made by Mec Gar that holds 15 rounds that does not extend past the pistol grip, along with 20 and 30 round magazines if that’s your flavor of Kool-Aid. There are South African 17-round magazines, but I have no experience with these and I’ve heard the reliability is hit or miss.
In my opinion a 15-round magazine is enough to help the Hi Power strive against the modern pistols. Now, as I said before, the pistol was chambered in the good old 9mm, but as the years went on, someone decided it needed to be chambered in 40 S&W, and it worked.  The 40 has quite the cult following, and again, it’s all personal preference, whether you want a bigger bullet or more bullets is all up to you. Oh you want it in 45? They have that too—it’s called a 1911.
Keep Your Handgun Locked and Loaded, Ready For Instant Use – Without Fear Of An Accident!
This whole topic came up to me because I fired my first Hi Power this Memorial Day. The Hi Power was a Browning and belonged to a friend who just purchased it that Friday. My first impression picking the weapon up was its heft. I’m not spoiled by the polymer pistols just yet, but the 9mm full-sized I’m used to is the military-issue M9. The Hi Power weighs noticeably more, almost as much as a 1911.
Like I said, I’m not spoiled on lightweight weapons, but a heavy pistol can be uncomfortable for some to conceal on a day to day basis, so this can be a negative aspect in the world of air weight J frames. My second impression was the overall comfort of the weapon in my hand: it just felt right. My gorilla hands rarely fit any stock grips perfectly, but something about the Hi Power suited me so well. The same was true for my friend, who is much smaller than me. He also loves how the trigger seems to be for his smaller hands. John Browning was a master of ergonomics in that this pistol feels like it was built for everyone.
The Browning slide is also much thinner than the usual Glocks and Sigs. This makes the weapon easier to conceal and actually more comfortable when pulled close to the body in a bellyband or IWB holster. The weapon, besides its weight, is pretty easy to conceal. If you carry a Sig or 191,1 the Hi Power will feel right at home.
Actually firing the Hi Power was a joy. The trigger was firm, but the trigger pull was crisp and consistent. It never felt spongy or stagey or anything like that. Honestly, I would describe it as a refined service pistol trigger. The sights were a typical low-profile three dot. The sights are simple and easy to use—nothing over the top—but perfect for a defensive pistol. My friend mentioned and I confirmed through Browning that there is a model with adjustable target sights.
The heft of the pistol made controlling the standard Winchester white box a breeze, even in rapid fire. The single action trigger, combined with controllability of the pistol make it easy to fire double taps or hammer pairs depending on your term preference. Apparently the old Hi Powers never functioned very well with hollow points, we strapped in some JHPs and the Hi Power ate them up. Apparently the older Hi Power and the unlicensed copies weren’t throated for wide mouth hollow points. These days it’s standard for the weapon to eat anything you feed it.
Accuracy with the weapon was superb. I should have brought something to measure the groups, but firing off hand, I impressed myself. My groups were all excellent, which I credit the pistol for. We didn’t just fire at a fixed line. We practiced drawing and firing, firing in the non-dominant hand, reloads, Mozambique drills, el presidente drills, firing from multiple positions like standing, kneeling, around “barriers” and forward and rear prone. The pistol performed well, and the ergonomics really shined during this drills.
The safety is very similar to the 1911. The model I fired featured a large, ambidextrous thumb safety above the grip. The safety was very easy to engage in both safe and fire mode. The safety was very easy to reach for with both small and large hands.
Shopping around online, I was surprised to see the amount of quality holsters out there. Browning has their own holsters, and De Santis makes beautiful holster as always. I was disappointed to find out that Blackhawk does not produce a holster in their popular SERPA line for the Hi Power. I personally love the SERPA and would love to see one that fit the Hi Power.
Magazines are pretty widely available as well and typically priced. I suggest going with either Browning mags or Mec gar. If Wilson Combat put out mags for the Hi Power, I’d be all over them. There are some very cheap surplus mags out there that may be hit or miss, as a lot of surplus stuff usually is.
I’ve officially fallen in love with the Hi Power. The Hi Power is such a refined pistol, and it’s knocked the 30-06 Winchester Model 70 off the top of my wish list. The Hi Power may not have its fan club shouting how wonderful it is or someone arguing the Hi Power is the only way to go, but I think it deserves a second look. I would suggest to anyone that sees a Hi Power just hold it and tell me you don’t like your first impression.
The price varies by whatever country is putting them out, as well as the quality. Portuguese versions can be picked up for around six hundred in very good condition. Newer Brownings are about double that. The weapon is expensive, and that’s bound to turn some people off when a Glock can be had for six hundred. I can fully understand that reasoning, but something about the pistol is drawing me to it.
I can’t wait to have my hands on a piece of Browning’s history. I love the pistol, and I believe it will find a great place in my gun safe and stay there for a very, very long time.